Tank Level Monitor - 3 Tanks - SeeLevel 709-P3
The SeeLevel 709-P3 Systems monitors Battery Voltage, Fresh, Grey and Black tank levels and is equipped with a 3-way pump switch. This tank level monitoring system includes (1) Display, (1) Pigtail Harness, and (3) Tank Senders. Monitor levels on three tanks with one system. SeeLevel senders do not work on metal tanks.
Please read and review the wiring diagram, Display and Sender Manuals before installing.
Display Panel: Black panel, approximately 4" wide by 2.8" high by 1" thick (102mm wide X 71mm high X 25mm thick). Panel screws to the wall.
Senders: 710-SS Senders covers tanks 7” to 18” deep. Mounted on the outside of the tank.
System Power: Display requires 12 volts from the RV battery, the system will function from 11 volts to 16 volts. Current drain is less than 200mA.
Wiring: A single two-wire conductor is required from the display to the senders. All the senders are wired in parallel. 12 V power and ground are required for display. A separate two-wire conductor is required from the display to the LPG sender.
ADVANTAGES OF THE SEELEVEL II TANK MONITOR
Precision Perfected
The SeeLeveL II ™ tank monitor provides percentage of full, accurate tank measurement readouts that are accurate within ⅜ of an inch.
Simple to install
Two wires connect to your existing system wires and function on a common bus system. Accessible tanks are easy to retrofit.
Customize to fit most tanks
The senders are designed to be easily shortened or two can be combined to accommodate almost any holding tank shape or size. * Will work on most plastic or polyethylene holding tanks containing any water-soluble products. Will not work on metal tanks.
Reliable external sensors
Our trouble-free senders adhere externally to the tanks eliminating sewage build-up that can affect internal sensors.
Service and Warranty
Our professional and knowledgeable technicians are on-call to assist you with any problems you may encounter. This product offers a one-year limited warranty.
